• Welcome to Avian Avenue! To view our forum with less advertisments please register with us.
    Memberships are free and it will just take a moment. Click here

T stand input would be nice

saroj12

Ripping up the road
Avenue Veteran
Celebirdy of the Month
Mayor of the Avenue
Avenue Spotlight Award
Joined
10/15/09
Messages
60,238
Location
fl
Real Name
saroj

1/2” thick
 

saroj12

Ripping up the road
Avenue Veteran
Celebirdy of the Month
Mayor of the Avenue
Avenue Spotlight Award
Joined
10/15/09
Messages
60,238
Location
fl
Real Name
saroj

saroj12

Ripping up the road
Avenue Veteran
Celebirdy of the Month
Mayor of the Avenue
Avenue Spotlight Award
Joined
10/15/09
Messages
60,238
Location
fl
Real Name
saroj
Hmmm going out to the shop in a few minutes. So we need 2 and 3 foot forked branches or longer than that?
not too much longer. Thanks! I’m so excited you might have two such branches!
 

Macawnutz

Seriously Nutz!
Super Administrator
Vendor
Avenue Veteran
Celebirdy of the Month
Mayor of the Avenue
Avenue Spotlight Award
Joined
10/21/11
Messages
32,951
Location
Wisconsin
Real Name
Sarah
not too much longer. Thanks! I’m so excited you might have two such branches!
Well, I will have more in another month or two as we haven't brought in many whole trees through the winter. Let me take a look though.
 

saroj12

Ripping up the road
Avenue Veteran
Celebirdy of the Month
Mayor of the Avenue
Avenue Spotlight Award
Joined
10/15/09
Messages
60,238
Location
fl
Real Name
saroj
Well, I will have more in another month or two as we haven't brought in many whole trees through the winter. Let me take a look though.
Thanks!
 

Macawnutz

Seriously Nutz!
Super Administrator
Vendor
Avenue Veteran
Celebirdy of the Month
Mayor of the Avenue
Avenue Spotlight Award
Joined
10/21/11
Messages
32,951
Location
Wisconsin
Real Name
Sarah
Im short. Looking at about 2' tall and 22" wide. Maple is the only forked branches I keep in stock and I keep them short for cage mounted perches.

20210306_114856.jpg
 

saroj12

Ripping up the road
Avenue Veteran
Celebirdy of the Month
Mayor of the Avenue
Avenue Spotlight Award
Joined
10/15/09
Messages
60,238
Location
fl
Real Name
saroj
The vertical 3 ft can be straight, no fork. love the branches. I’ll take both plus 3 ft straight
 

Macawnutz

Seriously Nutz!
Super Administrator
Vendor
Avenue Veteran
Celebirdy of the Month
Mayor of the Avenue
Avenue Spotlight Award
Joined
10/21/11
Messages
32,951
Location
Wisconsin
Real Name
Sarah
That I can do. It's hard maple so the bark will be coming off and I will round sand all the ends nice. Yes?
 

saroj12

Ripping up the road
Avenue Veteran
Celebirdy of the Month
Mayor of the Avenue
Avenue Spotlight Award
Joined
10/15/09
Messages
60,238
Location
fl
Real Name
saroj
That I can do. It's hard maple so the bark will be coming off and I will round sand all the ends nice. Yes?
Can we leave the bark on?
 

saroj12

Ripping up the road
Avenue Veteran
Celebirdy of the Month
Mayor of the Avenue
Avenue Spotlight Award
Joined
10/15/09
Messages
60,238
Location
fl
Real Name
saroj
I’m thinking do you want to assemble this, take it apart for shipping but the holes etc will be drilled and you provide the ss hardware. I’ll send you the board
 

saroj12

Ripping up the road
Avenue Veteran
Celebirdy of the Month
Mayor of the Avenue
Avenue Spotlight Award
Joined
10/15/09
Messages
60,238
Location
fl
Real Name
saroj
If you don’t want to no worries
 

Macawnutz

Seriously Nutz!
Super Administrator
Vendor
Avenue Veteran
Celebirdy of the Month
Mayor of the Avenue
Avenue Spotlight Award
Joined
10/21/11
Messages
32,951
Location
Wisconsin
Real Name
Sarah
Maple is one of those that some sources say the bark is safe and some say it's not. I always play it safe and remove it. That I would leave up to you.

As far as installation I don't mind running the holes and hardware. I don't think I would need the base.
 

saroj12

Ripping up the road
Avenue Veteran
Celebirdy of the Month
Mayor of the Avenue
Avenue Spotlight Award
Joined
10/15/09
Messages
60,238
Location
fl
Real Name
saroj
Maple is one of those that some sources say the bark is safe and some say it's not. I always play it safe and remove it. That I would leave up to you.

As far as installation I don't mind running the holes and hardware. I don't think I would need the base.
Ok please remove the bark and figure the cost of the labor into the total. Thanks so much Sarah!
 

Macawnutz

Seriously Nutz!
Super Administrator
Vendor
Avenue Veteran
Celebirdy of the Month
Mayor of the Avenue
Avenue Spotlight Award
Joined
10/21/11
Messages
32,951
Location
Wisconsin
Real Name
Sarah
Ok please remove the bark and figure the cost of the labor into the total. Thanks so much Sarah!
Okay. I'll get the bark stripped and message you when I'm ready for configuration questions. :)
 

saroj12

Ripping up the road
Avenue Veteran
Celebirdy of the Month
Mayor of the Avenue
Avenue Spotlight Award
Joined
10/15/09
Messages
60,238
Location
fl
Real Name
saroj

saroj12

Ripping up the road
Avenue Veteran
Celebirdy of the Month
Mayor of the Avenue
Avenue Spotlight Award
Joined
10/15/09
Messages
60,238
Location
fl
Real Name
saroj
Ordered two of these. Don’t know bolt diameter 1/4”? Please could you drill two far apart holes for these dishes? Thanks Sarah!

 

Clueless

Joyriding the Neighborhood
Avenue Veteran
Celebirdy of the Month
Mayor of the Avenue
Avenue Spotlight Award
Avenue Concierge
TAILGATING
Joined
11/3/12
Messages
24,106
Lucky spoiled birdies......
 

JLcribber

@cockatoojohn
Avenue Veteran
Celebirdy of the Month
Mayor of the Avenue
Avenue Spotlight Award
Shutterbugs' Best
Avenue Concierge
Joined
10/16/09
Messages
22,621
Location
Alberta, Canada
Real Name
John
I’m thinking do you want to assemble this, take it apart for shipping but the holes etc will be drilled and you provide the ss hardware. I’ll send you the board
I thought you were going to make it. :)
 
Top